Products by Application
Choose DEBBEX construction chemical products by application. We have organised our range into clear categories so you can quickly find the right solution for bonding, sealing, anchoring, waterproofing, repairs and surface protection. Simply select the relevant category to view the corresponding products.
Concrete Surfaces
Interior Design
Exterior
Facades
Interior
Interior Flooring
Bathrooms
Industrial Facilities and Floors
Roofs
Patios and Balconies
Interior Plaster
Glazing
1K FINAL Polyurethane Waterproofing
1K FINAL Polyurethane Waterproofing is a modern, single-component polyurethane waterproofing system that is the ideal choice for roofs and terraces. It creates a durable, long-lasting protective layer. It features excellent water resistance and withstands mechanical stress as well as temperature extremes ranging from –40 °C to +80 °C. Thanks to its UV stability and freeze resistance, it provides lasting and reliable protection for many years.
Adhesive Bridge Concentrate
The adhesive primer is a single-component, solvent-free coating that can be used both indoors and outdoors on cured plaster, non-structural and exposed concrete, glass wallpaper, wood, paper, and drywall surfaces, as well as chipboard, OSB panels, Formica, wall and floor tiles, etc.
Acrylic EXTERIOR
Intended primarily for sealing exterior joints between window and door frames and masonry, corner joints in drywall structures, partition walls, particleboard, and wooden reinforcements, etc. The sealant can be painted over once cured. During curing, the sealant settles slightly, creating a characteristic beading effect. In expansion joints, it can accommodate up to 12.5% of movement. For interior use in repairing cracks and fissures in plaster, masonry, wood, and concrete. Sealing window sills, suspended ceiling panels, and joints between staircases and masonry.
Acrylic Stucco
For sealing cracks and joints indoors and outdoors, especially on materials finished with a stucco layer. For stucco finishes, exposed concrete, polystyrene ceiling panels, and joints between staircases and masonry, etc. Sealing joints between window and door frames and masonry where a stucco effect is desired. Contains white silica sand.
WET ON WET Acrylic
A unique, high-quality sealant. It can be painted over shortly after application. Thanks to UCA® technology, cracking of the applied paint is minimized and fading is prevented. Suitable for interior work, sealing cracks in masonry, and filling joints. For example: window and door frames, window sills, screw holes, and joints between staircases and masonry. Suitable for use on metals—it does not cause corrosion.
Acrylic sealant
For sealing joints between window and door frames and masonry, corner joints in drywall structures, partition walls, particleboard, and suspended ceiling panels. The sealant can be painted over once cured. During curing, the sealant settles slightly, creating a characteristic beading effect. We also offer a unique transparent version for applications requiring transparent joints in structures.
EXPRES Acrylic Sealant
EXPRES acrylic filler is fast-drying and easy to sand. It can be painted over 20 minutes after application. Suitable for interior work, filling cracks in masonry, and all types of joints, such as window and door frames, window sills, and drywall structures. Local repairs to interior plaster on porous blocks and damaged drywall panels. Filling and leveling cracks, holes, and joints in concrete, masonry, plaster, and drywall.
Acrylic Caulk for Drywall
This is a plastoelastic sealant with excellent adhesion, particularly to drywall, but also to porous and non-porous materials, painted wood, and the like. It is designed for joints between wooden or metal structures, or PVC frames, and masonry or drywall. Thanks to its high quality, it can also be used for outdoor applications—such as vertical joints between window frames, door frames, and exterior masonry, as well as for repairing cracks in plaster. It is an ideal material for filling the inside corners of joints in drywall panels. Depending on your needs and the dimensions of the joints, it can be used in combination with filler cords. Approximate coverage: 12.9 m for a 4 x 6 mm joint.
ConcreteContact
Solvent-free coating. Creates a bonding primer for subsequent layers. Intended for indoor and outdoor use to strengthen critical substrates; alkali-resistant, vapor-permeable, and weather-resistant. For preparing concrete surfaces prior to the application of gypsum-based materials, such as gypsum plaster, skim coats, and gypsum leveling compounds. The coating’s drying time is approximately 10 hours.
WHITE FLEX White Flexible Foam
WHITE FLEX white flexible foam is a low-expansion installation foam that can be applied at temperatures as low as -3 °C, suitable for professional installation of windows, doors, garage doors, and storefronts. It features extreme and lasting flexibility with an elongation of up to 40%, excellent sound insulation in the range of 57–63 dB, and fast curing, allowing it to be cut after approximately 30 minutes.
BOND FLEX CRYSTAL polyurethane
A unique solution for construction and the home. Provides excellent adhesion and sealing for all joints. Excellent adhesion to concrete, natural stone, masonry, wood, glass, and metals. Widely used by bricklayers, mechanics, electricians, and locksmiths.
BOND FLEX PU 40 FC Polyurethane
A unique solution for construction and the home. Provides excellent adhesion and seals all joints. Excellent adhesion to concrete, natural stone, masonry, wood, glass, and metals. Popular among bricklayers, sheet metal workers, roofers, mechanics, electricians, and locksmiths.
1K Cement-Based Waterproofing
In modern construction, virtually no building project can do without waterproofing. Whether you’re building or renovating a bathroom, terrace, or balcony, it’s always essential to have high-quality waterproofing that prevents water from penetrating into other structures. 1K Cement-Based Waterproofing provides all of this. It is a durable and highly flexible cement-based waterproofing compound with excellent adhesion to the substrate and resistance to water pressure.
Krystalizol Cement-Based Crystallizing Waterproofing
It is a waterproofing system that prevents water from penetrating concrete or other cement-based substrates exposed to constant water pressure. It provides dual protection. The capillary component penetrates deep into the capillary structure of the concrete, where it crystallizes and seals the concrete from the inside. The barrier action forms a solid, waterproof layer on the surface of the structure. It ensures increased impermeability of concrete and mortar against water, acids, and petroleum products, prevents concrete corrosion, and simultaneously forms a waterproof layer on the surface. Any type of paint or plaster can be applied to a surface treated with Krystalizol.
ARCTIC SF Chemical Anchor
The winter version of the vinyl ester chemical anchor allows for anchoring in all types of substrates at temperatures as low as -20 °C. This makes it easy to anchor into substrates such as concrete, concrete blocks, solid masonry, hollow bricks, natural stone, and lightweight concrete, even in the most severe cold. Suitable for extreme loads and for securing wooden or steel structures, facade elements, sports equipment, scaffolding, railing bases, posts, fences, cable trays, handrails, awnings, or gates, etc. Thanks to its excellent chemical resistance, it can also be used for anchoring, for example, staircases in swimming pools or traffic signs along roads and sidewalks.
Styrene-Free Chemical Anchor POLYESTER SF
A professional two-component chemical system for fast and secure anchoring. Ideal for securing heavy objects indoors or outdoors, ensuring fast and high-quality results.
POLYESTER S Chemical Anchor
This chemical anchor, based on polyester resins and styrene, is a cost-effective option for basic yet high-performance anchoring. Styrene is known for its characteristic odor, which dissipates after proper curing; however, we recommend applying it only outdoors, where there is regular ventilation. It allows for anchoring in all types of substrates at temperatures up to +35 °C. It can thus be easily used to anchor into substrates such as concrete, concrete blocks, solid masonry, hollow bricks, natural stone, and lightweight concrete at normal temperatures. Suitable for high loads and for securing facade elements, industrial or sports equipment, TV mounts, railing bases, grilles, posts, fences, cable trays, pipes, handrails, tie rods, awnings, or gates, etc.
VINYLESTER SF Chemical Anchor
A professional two-component chemical system for fast and secure anchoring. Ideal for securing heavy objects indoors or outdoors, ensuring fast and high-quality results.
FIX 7500 Dispersion-Based Carpet Adhesive
This is a versatile, solvent-free, dispersion-based floor adhesive. It creates a permanently strong, elastic bond. Ready to use immediately and easy to apply; spreads easily. High adhesion to absorbent materials. For bonding floor coverings to absorbent substrates. Applications: fixing textile floor coverings and carpets (long-pile), PVC on foam backing, PVC with felt backing, CV flooring, concrete substrates, leveling compounds, mineral substrates, particleboard and cement-bonded particleboard; can also be used on plywood, polystyrene, or polyurethane.
CL 7300 Dispersion Adhesive for PVC Flooring
Solvent-free, dispersion-based adhesive. Forms a permanently strong, elastic bond. Ready to use immediately and easily; spreads easily. High adhesion to absorbent materials. Applications: PVC on foam, PVC with felt, CV roofing, concrete substrates, leveling compounds, mineral substrates, particleboard and cement-bonded particleboard; can also be used on plywood, polystyrene, or polyurethane.
DUO FLEX L8600 Elastic Adhesive and Waterproofing
A single-component, high-modulus adhesive based on MS polymer. Ideal for installing new flooring elements over old tiles, artificial marble, screeds and subfloors, metal, wood, and wood-based materials. Thanks to its viscosity, it can be used to bond materials even vertically—such as tiles or other decorative elements. It perfectly levels out any minor unevenness. It can also be used to bond waterproofing grids and PVC membranes with a backing layer of non-woven PES fabric.
HYBRI FLOOR Flexible Floor Adhesive
HYBRI FLOOR L8400 Elastic Floor Adhesive is a single-component, high-modulus adhesive based on MS polymer that cures through vulcanization with atmospheric moisture, creating a permanently strong bond that is resistant to moisture and water. For use in bonding wooden parquet to both absorbent and non-absorbent substrates. For bonding vinyl, PVC, linoleum, or wood.
EPOXIN DEKOR — Epoxy Resin for Casting
A 2K epoxy casting compound for the production of decorative elements and for model-making. It is a low-viscosity, solvent-free compound that does not contain nonylphenol.
EPOXIN F1000 DRY
This is a two-component epoxy primer designed for dust-free preparation of absorbent, porous substrates such as concrete, masonry, plaster, and drywall prior to applying a topcoat of epoxy floor coating. Suitable for production halls, assembly shops, machine rooms, loading docks, warehouses, garages, workshops, boiler rooms, heat exchangers, service centers, and repair shops. It is also used as a primer to prepare substrates prior to the installation of stone and marble flooring.
EPOXIN F1200 WET
Two-component epoxy primer for damp substrates (substrate moisture content above 4%). The material is low-viscosity and free of solvents and nonylphenol.
EPOXIN F1300 WET SPECIAL
A two-component epoxy primer for dry, damp (substrate moisture content above 4%), and even oily substrates. The material is low-viscosity and free of solvents and nonylphenol.
EPOXIN F5000
A highly durable two-component epoxy coating for concrete structures. It forms an abrasion-resistant, mechanically durable, and easily washable layer on the surface. Suitable for coating porous materials in building interiors—warehouses, garages, workshops, service centers, and repair shops; wet areas—laundromats, washrooms, and showers; and damp areas—kitchens, bathrooms, basements, etc.
EPOXIN F5100
A pigmented, two-component textured epoxy coating for the final wear layer. The material is free of solvents and nonylphenol.
EPOXIN F5200 FLEX
A flexible two-component epoxy coating and trowel finish for the final wear layer. The material is intended for use in the flooring systems of indoor parking garages—DB Park I and DB Park II.
EPOXIN F7000
A transparent, two-component epoxy compound for creating the final wear layer. The material is low-viscosity and free of solvents and nonylphenol.
EPOXIN F9000 CONDUCTIVE
A water-dilutable, two-component epoxy primer for an electrostatically conductive flooring system. The material is low-viscosity and solvent-free.
EPOXIN F9100 ANTI-STATIC
A pigmented, two-component, electrostatically conductive epoxy flooring system for the final wear layer. The material is low-viscosity and free of solvents and nonylphenol.
EPOXIN FW5050
2K pigmented epoxy coating for the final wear layer of floors. The product is water-based and free of solvents and nonylphenol. It is characterized by its high vapor permeability, making it suitable for areas at risk of future moisture (old basements, garages, etc.). It is suitable for direct application to concrete without prior priming. It is available in colors according to the RAL color chart. The product is intended for interior use only.
MAMUT GLUE FLEXI S2: An Extremely Flexible Adhesive for Wall and Floor Tiles
A highly flexible cement-based adhesive with reduced slippage and an extended setting time, suitable for more demanding conditions. Designed for bonding wall and floor tiles, bonding thermal insulation materials, and applying a skim coat over reinforcing fabric. Can be applied directly to existing floor tiles, electric heating mats, large-format elements subject to high mechanical loads, as well as plaster, concrete, aerated concrete, unplastered masonry, etc.
ULTRA FLEX C2TE S1 Flexible Gel Adhesive for Wall and Floor Tiles
Flexible gel adhesive for wall and floor tiles. For bonding larger-format tiles and applications requiring greater flexibility.
STŘECHA S-T4 Flexible Waterproofing
A single-component waterproofing coating based on a copolymer dispersion and iron(II) oxide. Ideal for the renovation of asphalt-shingle roofs with a minimum roof slope of 3%. Protective coating for galvanized sheet metal and asbestos-cement roofing. Once cured, it forms a waterproof waterproofing membrane. Note: Surface irregularities must not exceed ±5 mm.
SUPER FLEX C2TE S1 Flexible Tile Adhesive
For wall and floor tiles. Improved cement-based flexible adhesive (S1). Designed for bonding ceramic wall and floor tiles to interior or exterior substrates.
QUARTZ C2 FX Adhesive for Wall and Floor Tiles
A thin-layer, cement-based adhesive mortar designed for bonding ceramic tiles and natural and artificial stone tiles to plaster, concrete, aerated concrete, and unplastered masonry, as well as for bonding tiles to liquid waterproofing coatings, such as “Tekutá lepenka” and other waterproofing compounds, etc. The adhesive is suitable for bonding polystyrene thermal insulation materials or mineral wool boards to facade masonry. For skimming facade mineral insulation boards and polystyrene using reinforcing mesh.
QUARTZ EXTRA C2T FX Tile Adhesive
A thin-layer, cement-based adhesive mortar designed for bonding ceramic wall and floor tiles, natural and artificial stone, fine-grained stoneware slabs of varying thicknesses, and large-format slabs to plaster, concrete, aerated concrete, and unplastered masonry. It is also used for bonding floor tiles to heated floors, as well as to liquid waterproofing coatings (e.g., Tekutá lepenka) and other waterproofing materials. The adhesive is suitable for bonding polystyrene thermal insulation materials or mineral wool boards to facade masonry.
QUARTZ FX C2TE Adhesive for Wall and Floor Tiles
A thin-layer, cement-based adhesive mortar designed for bonding ceramic wall and floor tiles, natural and artificial stone, and slabs of varying thicknesses—such as Lotto tiles, fine-grained stoneware, and large-format slabs—to plaster, concrete, aerated concrete, and unplastered masonry. It is also used for bonding floor tiles to heated substrates, liquid waterproofing coatings (e.g., Tekutá lepenka), other waterproofing materials, and existing floor tiles, etc. It is ideal for bonding polystyrene thermal insulation materials or mineral wool boards to facade masonry.
Black Gasket Sealant
For seals in the automotive and engineering industries. For joints subjected to extreme stress, e.g., seals for chemical reactors, differential seals, transmission seals, oil pans, steam irons, heating systems, industrial furnaces, engine seals, hot-air distribution systems, boiler flanges, high-temperature water distribution flanges, doors, and collars.
Red Gasket Sealant
For seals in the automotive and engineering industries. For joints subjected to extreme stress, e.g., seals for chemical reactors, differential seals, transmission seals, oil pans, steam irons, heating systems, industrial furnaces, engine seals, hot-air distribution systems, boiler flanges, high-temperature water distribution flanges, doors, and collars. Acetate-type silicone sealant with a temperature resistance range from -60 °C to +300 °C.
GUMOASFALT DN 350 (water-based)
GUMOASFALT DN 350 (water-based) is a new-generation waterproofing coating with an improved formula. Suitable for roof renovations and for protecting basements, garages, and concrete foundations. Adheres to sheet metal, concrete, and wood.
MS SEAL 25 Hybrid Sealant
For sealing expansion joints in concrete, floors, stone baseboards, window sills, staircases, etc. Sealing joints between wood, concrete, masonry, metals, plastics, and glass in both construction and industry. Sealing joints in the outer shell during the manufacture of industrial and residential containers. Bonding window sills, thresholds, stair treads, wall and floor tiles to walls and steel structures; flexible bonding of joints in the engineering and automotive industries.
MS SEAL 50 Hybrid Sealant
For sealing expansion joints in concrete, floors, stone baseboards, window sills, staircases, etc. Sealing joints between wood, concrete, masonry, metals, plastics, and glass in both construction and industry. Sealing joints in the outer shell during the manufacture of industrial and residential containers. Bonding window sills, thresholds, stair treads, wall and floor tiles to walls and steel structures; flexible bonding of joints in the engineering and automotive industries.
Core Plaster
This is a versatile, ready-to-use dry core plaster designed for panel surfaces and as a base coat, primarily used for wall finishing, repairing old plaster, or on surfaces such as brick, concrete, and aerated concrete. It meets all parameters specified in EN 998-1 in accordance with the requirements for Class GP plaster.
EXTERIÉR Single-Component Waterproofing
A ready-to-use, single-component, semi-fluid compound based on a polymer dispersion. Once the compound dries, it forms a highly elastic, tight, water-resistant coating with good adhesion to the substrate. This waterproofing product is designed for applying waterproofing coatings under ceramic wall and floor tiles in the interiors and exteriors of buildings: balconies, terraces, loggias, wet areas, bathrooms, showers, toilets, laundry rooms, basements, kitchens, washrooms, etc.
Single-Component Waterproofing for the BATHROOM
A ready-to-use, single-component, semi-fluid compound based on a polymer dispersion. Once the compound dries, it forms a highly elastic, impermeable, water-resistant coating with good adhesion to the substrate. This waterproofing product is designed for applying waterproofing coatings under ceramic wall and floor tiles in interiors with high humidity: bathrooms, showers, restrooms, laundry rooms, basements, kitchens, dishwashing areas, vegetable sorting areas, in food service facilities, etc.
Stove Sealant
For sealing cracks and joints in fireclay linings of stoves and fireplaces, stoves, furnaces, chimney flanges, flue pipes, joints in open hearths, and chimney systems. Full curing time is approximately 24 hours, depending on temperature and joint thickness. Hardens upon curing. Single-component joint sealant based on sodium silicate.
Lightweight, sandable filler (Qualy Fill)
It is designed for spot repairs and for filling small and large cracks in drywall, masonry, concrete, plaster, etc., and meets the requirements for sandability. It is an ultra-lightweight, ready-mixed filler for quick and easy repairs. The filler is whipped, lightweight, and features minimal shrinkage during curing. Ideal for minor repairs to damaged surfaces. It does not change volume and does not sag. Coverage depends on the complexity of the cracks.
FASÁDA ELASTIC Adhesive and Skim Coat
This is a dry cement-based adhesive and skim coat mixture designed for the complete process of facade insulation, i.e., bonding thermal insulation materials such as EPS (expanded) polystyrene for facades, XPS (extruded polystyrene), and mineral fiber insulation boards to masonry and facades. It is also used for the entire skimming process, i.e., applying reinforcing mesh to these thermal insulation materials, thereby creating an ideal substrate for the final finish before applying decorative plasters.It is also used in combination with reinforcing mesh for the renovation of old, cracked plaster. A system product for the certified thermal insulation system / ETICS Den Braven Therm STYRO and Den Braven Therm MINERAL.
FASÁDA UNI Adhesive and Skim Coat
This dry cement-based adhesive and skim coat mixture is designed for the complete process of facade insulation, i.e., bonding thermal insulation materials such as EPS (expanded) polystyrene and mineral fiber insulation boards to masonry and facades. It is also used for the entire skimming process—that is, applying reinforcing mesh to these thermal insulation materials—thereby creating an ideal substrate for the final finish before applying decorative plasters. It is also used in combination with reinforcing mesh for the renovation of old, cracked plaster.
QUARTZ FASÁDA Adhesive and Skim Coat Mortar
This is a dry cement-based adhesive and skim coat mixture designed for the complete process of facade insulation, i.e., bonding thermal insulation materials such as EPS (expanded) polystyrene, XPS (extruded polystyrene), and mineral fiber insulation boards to masonry and facades. It is also used for the entire skimming process, i.e., applying reinforcing mesh to these thermal insulation materials, thereby creating an ideal substrate for the final finish before applying decorative plasters. It is also used in combination with reinforcing mesh for the renovation of old, cracked plaster. It is not suitable for metal or plastic substrates, nor for wood or wood-based substrates!
WOODFIX D2 Wood Glue
For carpenters and DIY enthusiasts to bond products made of hardwoods and softwoods, veneer, particleboard, and pulp-based composite materials. Suitable for bonding children’s toys and items intended for contact with food. It is also used for bonding paper, cardboard, and textiles. Water resistance class D2 according to EN 204. The strength of the bonded joint exceeds that of the wood itself after just 4 hours. The use of a new homopolymer dispersion enables extremely short pressing times (10–20 minutes) while significantly reducing the total bonding time. Approximate adhesive consumption: 120–180 g/m².
WOODFIX D3 Wood Glue
For carpenters, for bonding assembly joints and flat joints, hard and soft woods, particleboard, and pulp-based and veneer-based composite materials. For bonding parquet, floating floors, wooden frames, and long glued joints; for the manufacture of windows, entry doors, kitchen furniture, etc. The pressing time ranges from 10 to 30 minutes, depending on the working temperature and the absorbency of the materials being bonded. It is water-resistant and meets the requirements of EN 204, Class D3. Approximate adhesive consumption: 100–150 g/m².
Tile Adhesive
For bonding ceramic tiles and mosaics, installing polystyrene ceiling panels and trim moldings—including decorative elements—and bonding to substrates such as: brick masonry, plaster, concrete, wood, drywall, and especially the old Formica cores of prefabricated apartment buildings and dormitories. It achieves excellent adhesion compared to most cement-based adhesives. Complies with the ČSN EN 12004 standard—Mortars and Adhesives for Ceramic Tiles—as a dispersion adhesive with extended open time (D1E).
Adhesive for Vapor Barriers
For bonding materials that are difficult to join, such as polyethylene and polypropylene. It is primarily used for bonding vapor barriers in roof systems—PE, PP, PVC, and DPC films, as well as aluminum foil—and for dust-tight door seals in the automotive industry. Ideal for use in the Den Braven 3D Sealing and Insulation System for bonding interior and exterior strips. The adhesive is solvent-free and creates a very strong bond.
PROFI Vapor Barrier Adhesive
For bonding materials that are difficult to join, such as polyethylene and polypropylene. It is primarily used for bonding vapor barriers in roof systems—including PE, PP, PVC, and EPDM rubber membranes, DPC, and aluminum foil—as well as dust barriers for doors in the automotive industry. Ideal for use in the Den Braven 3D Sealing and Insulation System for bonding interior and exterior strips. The adhesive is solvent-free and creates a very strong bond.
Polystyrene Adhesive
For bonding decorative polystyrene ceiling panels to absorbent substrates, for bonding polystyrene corner and edge moldings, including decorative elements, and for filling uneven areas—such as joints created when bonding large-format polystyrene panels to various building substrates. When bonding, at least one of the materials being bonded must be absorbent.
GRASS FIX Artificial Turf Adhesive
GRASS FIX Artificial Turf Adhesive is a modern, highly elastic adhesive based on MS polymers. Once cured, it is permanently resistant to water and temperatures ranging from -40 °C to +90 °C. Designed for bonding artificial turf to most building substrates. Suitable for both indoor and outdoor use.
Assembly Adhesive
For bonding decorative and acoustic panels, bonding polystyrene ceiling tiles, suspended ceilings, and moldings, and bonding polystyrene and wood to hardened PVC, concrete, plastered masonry, ceramic tiles, particleboard, etc. Resistant to dust and moisture.
Neutral silicone
For sealing and bonding glazing systems to wooden window frames with surfaces finished with synthetic and polyurethane paints. Strong adhesion to glass, aluminum, stainless steel, galvanized steel, and other building materials—does not cause metal oxidation. Sealing joints in sinks, washbasins, and refrigerated display cases. Sealing of ventilation systems, pipes, elbows, and transitions.
ALCOXY Neutral Silicone
Thanks to its high adhesion and elasticity, the new generation of ALCOXY Neutral Silicone is the ideal choice for working with polycarbonate (testing is required before application) or for sealing sheet metal components.
Concrete Repair BETON FIX
A two-component chemical system based on polyester resins for very fast concrete repairs. It is used to repair cracks, joints, edges, and corners in damaged concrete, stone, and masonry. It is used for repairing potholes, concrete staircases, and similar structures. It is also ideal as an adhesive for bonding materials to stone or masonry elements.
FINAL Concrete Repair Compound
This is a final-coat reprofiling mortar based on cement, fine filler, and modifying additives, offering excellent adhesion to concrete substrates and long-term resistance to water, weathering, and frost. Ideal for thin-layer repairs of concrete and reinforced concrete structures, as well as localized damage to balconies, loggias, fences, precast elements, etc. Use as a final layer in combination with the Concrete Filling and Repair Trowel. Does not run; can also be used on vertical surfaces. Subsequently, waterproofing, water-repellent, impregnating, and other protective coatings for concrete structures and exposed concrete may be applied as needed.
VÝPLŇ Concrete Repair Compound
This is a cement-based filling and reshaping mortar containing fine filler and modifying additives, with excellent adhesion to concrete substrates and reinforcement, and permanent resistance to water, weathering, and frost. It is used for repairs and reprofiling of concrete and reinforced concrete structures, as well as for localized damage to balconies, loggias, fences, precast elements, etc. It does not run, so it can also be used on vertical surfaces. Subsequently, apply FINAL Concrete Repair Compound, self-leveling floor compounds, Liquid Board, single-component waterproofing, or cement-based tile adhesives as needed.
Parquet Floor Filler
For interiors. For filling all types of wood and laminate floors, as well as the joints between baseboards and walls or staircases. It features strong adhesion, is paintable, and prevents water and dust from entering the joints.
Foam from a spray gun
Professional-grade foam in a spray gun format for precise and economical application using an application gun. For installing door frames and window frames, filling cavities, installation spaces between panels, masonry partitions, ceilings, and floors, and electrical conduit passages. Excellent thermal insulation for attic spaces or bathtubs. Also suitable for sound insulation. If minimal foam expansion is required, use Low-Expansion Installation Foam.
MEGA 70 Foam Gun
Professional, single-component polyurethane foam for assembly and construction, specially developed to maximize yield and suitable for use at temperatures up to +35 °C. The resulting foam has an excellent texture even at +1 °C. If you need to work at temperatures below 0 °C down to -12 °C, you must use the winter version. PUR foam has excellent adhesion to concrete, plaster, masonry, wood, polystyrene, unplasticized PVC, and similar materials. Once cured, it is dimensionally stable and can be painted over with standard paints. Ideal for installing window and door units (windows, storefronts, doors, garage doors). Insulating penetrations, sealing bushings and conduits in walls, etc. Filling cavities in frame structures as thermal and acoustic insulation.
Binder for stone/marble flooring
An epoxy resin-based binder, specially designed for stone carpets. The binder is characterized by high strength, chemical resistance, and frost resistance. The consumption of the binder (components A+B) per 25 kg of aggregate is 1.36 kg.
Food-Grade Silicone
For demanding sealing and jointing applications in the food industry that require certification for food contact. Sealing joints and gaps in direct contact with grains, baked goods, pastries, cookies, wheat and corn flour, pasta, roasted corn, and cereal flakes. Sealing joints that come into direct contact with dairy products, fermented milk, yogurt, and fruit products such as fruit purees, compotes, and juices, dried and dehydrated fruit, including those preserved in brine, molasses, sugar products, and yeast. The product complies with the requirements of Section 3(1) and Section 16(2) of Ministry of Health Decree No. 38/2001 Coll. applicable to products intended for prolonged contact with food and meals. A CERTIFICATE was issued for this product by Authorized Body AO 224.
ALFA Primer
A single-component sealing primer that forms an elastic, transparent, durable, water-insoluble film. It creates an adhesive bond between subsequent layers. Particularly suitable for use under self-leveling compounds.
PRO 7600 Professional Dispersion Floor Adhesive
Professional, solvent-free, dispersion-based floor adhesive. Creates a permanently strong, elastic bond. Ready to use immediately and easily; spreads easily. High adhesion to absorbent materials. For bonding floor coverings to absorbent substrates. Applications: bonding vinyl tiles, carpet (long pile), tufted carpet (short pile), homogeneous PVC, cork, foam-backed PVC, felt-backed PVC, CV flooring, linoleum, and for bonding coverings even to vertical walls (PVC), on concrete substrates, leveling compounds, mineral substrates, particleboard and cement-bonded particleboard; can also be used on plywood, polystyrene, or polyurethane.
PU 50 FC Polyurethane Sealant
For bonding and sealing in construction and industry. Joints between wooden, metal, aluminum, or PVC frames and masonry. Sealing expansion joints in heavy-duty and industrial floors and waterproof joints in swimming pools with an expansion capacity of ±25%, joints in prestressed concrete and stone walls, as well as joints between wood, concrete, brick masonry, metals, plastics, and glass. Bonding window sills and thresholds to steel structures and during repairs to stair treads.
PUREXIN F4000
A three-component, highly elastic polyurethane waterproofing membrane that bridges both static and dynamic cracks; free of organic solvents.
PUREXIN F6000
2K polyurethane colored self-leveling compound. This material is designed for creating flexible floors in commercial interior spaces.
FAST FX C2FT Fast-Setting Adhesive for Wall and Floor Tiles
This fast-setting tile adhesive is designed for bonding all types of wall and floor tiles (including large-format tiles), paving stones, and mosaics in both interior and exterior applications, on floors and walls made of traditional materials with cement plaster, cement screeds, anhydrite screeds, and drywall (after prior treatment with a primer). It is also suitable for interior painted walls, provided the paint is firmly bonded to the substrate, as well as for old marble or terrazzo floors and sufficiently cured concrete structures.
FASTdry Quick-Drying Primer
FASTdry Quick-Drying Primer is a special, quick-drying, single-component coating ideal for both absorbent and low-absorbent substrates. It is recommended for use under Den Braven self-leveling compounds, where rapid drying of the primer is essential, as it serves as a bonding agent prior to the application of screeds and adhesives.
Turbo Speed Quick-Drying PU Adhesive
High-quality, multipurpose PU adhesive. Specially developed for fast bonding, with initial setting beginning after just 60 seconds. The adhesive has excellent adhesion to most building substrates—concrete, plaster, masonry, wood, polystyrene, unplasticized PVC, etc. It is used for bonding EPS and XPS boards, drywall, wooden elements, OSB boards, decorative elements, window sills, and interior partitions.
FAST FIX Quick-Setting Anchoring Compound
This is a fast-setting, cement-based repair mortar. Once cured, the mortar is resistant to water, weathering, and freezing. Application thickness in a single pass: 1 to 30 cm.
S2802A Primer of Building Substrates
A single-component, low-viscosity liquid based on an aqueous dispersion of the styrene-acrylate copolymer SOKRAT, which forms a transparent, water-insoluble polymer film upon curing. It reduces and evens out the absorbency of the substrate and improves the adhesion of subsequent layers. It is used for primer coats under base and finish plasters, as well as for exterior and interior paints. It is also used to improve the adhesion of construction adhesives, self-leveling compounds, etc.
ALFA S500 Self-Leveling Compound
A self-leveling screed mix based on ALFA gypsum, fillers, and special performance-enhancing additives, which cures through water evaporation, creating a permanently strong surface comparable to concrete. Once fully cured, it does not require sanding. Its advantages include high flexural tensile strength. It is followed by the installation of, for example, floating floors, tile, parquet, carpet, linoleum, and vinyl. It complies with the EN 13813 standard. The mixture can be applied both manually and mechanically.
ALFA S700 Self-Leveling Compound
A self-leveling screed mix based on ALFA gypsum, fillers, and special performance-enhancing additives, which cures through water evaporation and creates a permanently strong surface comparable to concrete. For thicknesses of 2–30 mm.
ALFA S800 Self-Leveling Compound
This is a self-leveling screed mix that creates a permanently strong surface comparable to concrete. This self-leveling mix features a revolutionary sand-free formula that can level out height differences ranging from 0 to 30 mm. It is not suitable as a final surface finish.
MULTI FLOOR S600 Self-Leveling Floor Compound
A professional cement-based leveling compound designed to perfectly level subfloors before installing tiles or other floor coverings. It creates a permanently solid and level surface for interior use.
PREMIUM S200 Self-Leveling Floor Compound
For large-area leveling of significant unevenness, primarily on concrete floors, with a thickness of 2–30 mm, in a single application. The self-leveling compound has excellent flow properties and high strength. The final layers of floor coverings are then installed, such as floating floors, tile, hardwood, carpet, or linoleum. Complies with EN 13813. Safe for foot traffic after 8 hours.
RAPID S400 Self-Leveling Floor Compound
For leveling out significant unevenness, particularly in concrete floors or sloped layers, as a substrate for Liquid Underlayment or cement-based tile adhesive. Levels height differences in a single layer of 2–30 mm; can be applied over the entire surface up to a total thickness of 30 mm in two layers. For leveling local unevenness up to a thickness of 30 mm in a single application. The final layers of floor coverings are then installed, e.g., floating floors, tiles, parquet, carpet, or linoleum. Complies with the EN 13813 standard.
THERMO S300 Self-Leveling Floor Compound
A self-leveling screed compound based on cement, fillers, and special performance-enhancing additives. It is used to level concrete surfaces as a flexible leveling layer for heated floors in commercial and residential construction. Levels height differences across the entire surface to a layer thickness of 2–30 mm in a single application. The final layers of floor coverings are then installed, such as floating floors, tiles, parquet, carpet, or linoleum. Complies with EN 13813. Normal foot traffic permitted after 8 hours.
Food-grade neutral silicone
For sealing stainless steel parts of swimming pools, sinks, acrylic bathtubs, ceramic washbasins, tiles, and joints in sanitary environments such as bathrooms, kitchens, restrooms, laundry rooms, etc. For sealing refrigerated display cases and in healthcare settings. High adhesion to building materials such as steel, masonry, glazed surfaces, plastics, acrylics, etc. Does not cause metal oxidation.
Sanitary Silicone
For grouting tiles, all sanitary ware (sinks, bidets, urinals, toilet bowls), showers, kitchen cabinets, enameled bathtubs, etc. High adhesion to glass, enamel, tiles, and glazed ceramics. Excellent durability in sanitary environments. For grouting acrylic shower pans, it is necessary to use Sanitary Neutral Silicone.
PREMIUM Sanitary Silicone
Premium-quality sanitary silicone designed for environments requiring high protection and long-term durability in sanitary settings. The improved formula enhances adhesion to non-porous surfaces and ensures greater heat resistance. Suitable for substrates made of glass, porcelain, epoxy and polyester panels, PVC, stainless steel, anodized aluminum, and painted wood.
SAURUS GLUE Clear UV
SAURUS GLUE Clear UV is perfect for outdoor use. Its UV resistance and transparency ensure the durability and invisibility of the bonded joint.
SAURUS GLUE Crystal
If you want the cable to blend into its surroundings like a chameleon, you couldn't make a better choice. Its most important features include, of course, transparency and, on top of that, flexibility.
SAURUS GLUE Disper Fix
A high-quality, fast-drying, and reliable adhesive. You can use it in your workshop, at home, in the garage, or even at work.
SAURUS GLUE High Tack
SAURUS GLUE High Tack is the best-known and most widely used adhesive in the mammoth family. It is a professional assembly adhesive with instant bonding strength of up to 500 kg/m². It holds immediately, without supports or clamps, and thanks to its thicker consistency, it stays exactly where you apply it. Suitable for construction sites, workshops, and demanding assembly applications where the object cannot be mechanically secured until the adhesive cures. Compatible with common building materials and proven in practice for over 20 years, it provides reliable, strong, and precise bonds for professional use.
SAURUS GLUE Multi
The best thing about SAURUS GLUE Multi is its versatility. It both glues and seals at the same time. And that’s why it saves you time and money.
SAURUS GLUE Total
The main advantage of SAURUS GLUE Total is its final strength of 50 kg/cm². It is therefore best suited for applications where you need a flexible bond with maximum strength.
Silicone Acrylic
For interiors. Repairing cracks and fissures in plaster, masonry, wood, and concrete. Sealing joints between window and door frames and masonry. Sealing window sills and joints between staircases and masonry. Sealing titanium-zinc window sills and masonry. The acrylic silicone sealant is white when applied in its transparent version and becomes transparent as it dries.
IG (Isol Glass) Silicone
A single-component, special-purpose, high-modulus, neutral silicone sealant. It cures through vulcanization with atmospheric moisture, forming a permanently strong, hard, and elastic bond. It is used for secondary sealing of insulating glass in a two-stage sealing system in combination with polyisobutylene tape and a welded or butyl-injected spacer, where IG silicone provides high mechanical strength and long-term durability. For professional use only.
Fast-setting concrete for columns
Post concrete is a dry concrete mix that can be applied without a mixer or mixing. It sets quickly, beginning to harden after just 5 minutes. It is used primarily for the rapid anchoring of posts, poles, traffic signs, lamps, gazebos, metal legs, clotheslines, and other garden features.
JOINT FIX Grout
It's that simple! Even a complete beginner can do the job—no professional masonry tools required. You don’t need a drill, mixers, or water. The job is relatively clean, fast, and efficient. JOINT FIX grout is a high-quality, durable, ready-to-use grout. It’s suitable not only for repairing chipped joints in masonry but also for grouting tiles with joint widths of up to 2 cm, including joints in stone and masonry, both indoors and outdoors. It can be used for bonding loose wall and floor tiles, grouting masonry, fence boards, and facing bricks, as well as for quick repairs to plaster and exposed concrete that do not serve a structural function.
Stucco Plaster
This is a ready-mixed stucco plaster used primarily for finishing walls, repairing old plaster, or applying to surfaces such as smooth concrete, aerated concrete, and drywall. When used in less demanding applications, its whiteness allows it to serve as a substitute for a primer. It is intended for the renovation of prefabricated apartments after wallpaper removal, for wall repairs, or for repairing old plaster before painting. It is suitable for use in finishing work after the base plaster has dried.
NANO System Deep primer
A high-quality, deep-penetrating system with nanoparticles designed to unify the absorbency of the substrate and reduce water absorption prior to installing wall and floor tiles, before leveling floors with self-leveling compounds, for spot repairs to concrete substrates, concrete floors, brick masonry, and plaster, or before painting masonry or facades. The nano-size of free particles in the primer dispersion was determined at the Institute for Nanomaterials, Advanced Technologies, and Innovation at the Technical University of Liberec.
2K Liquid Cardboard Waterproofing
Top-quality cement-based waterproofing for use under wall and floor tiles. The ideal waterproofing coating for balconies, terraces, loggias, and basements, as well as for bathrooms, shower stalls, and other areas.
Liquid membrane
A highly flexible, spreadable, and sprayable sealant based on MS polymers. It is UV-resistant and waterproof. It does not sag and is suitable for both horizontal and vertical surfaces. It is used to seal windows and replaces interior sealing tape. It is suitable for sealing joints between chimneys and flashing, sheet metal components, gutters, and seams between metal sheets. It is primarily used in the metalworking industry.
THERMO ADHESIVE
It is a single-component, low-expansion polyurethane adhesive, specially developed for highly effective bonding and installation of ETICS insulation systems. It is also suitable for filling joints between thermal insulation boards made of EPS, XPS, and mineral fiber (so-called “wool”), as well as for bonding EPS-P or XPS baseboards. Excellent adhesion to concrete, plaster, masonry, wood, polystyrene, etc. If nighttime temperatures are expected to drop below 0 °C, we recommend using the winter version, Thermo Kleber WINTER.
UNI 7400 Universal Dispersion Adhesive for PVC and Carpets
Universal, solvent-free, dispersion-based floor adhesive. Creates a permanently strong, flexible bond. Ready to use immediately and easily; spreads easily. High adhesion to absorbent materials. For bonding floor coverings to absorbent substrates. Applications: PVC on foam backing, PVC with felt backing, CV flooring, cork, textile carpets (long-pile), on concrete substrates, leveling compounds, mineral substrates, particleboard and cement-bonded particleboard; can also be used on plywood, polystyrene, or polyurethane.
All-Purpose Silicone
For household use. Seals joints in building structures. High adhesion to enamel, ceramic tiles, and surface-treated metals. Not suitable for use on PE, PP, Teflon, concrete, marble, aluminum, copper and galvanized sheet metal, lead, galvanized steel, or bituminous substrates.
UV Binder for Stone/Marble Carpet
A polyaspartate-based binder with UV resistance, designed specifically for exterior applications to preserve the color fastness of aggregate and marble. The binder is characterized by high strength, chemical resistance, freeze-thaw resistance, and excellent UV resistance. The binder consumption (components A+B) for 25 kg of aggregate is 1.36 kg.
DB II Interior and Exterior Stucco Plaster
This is a versatile dry stucco plaster intended for direct application as a thin-layer plaster, on precast panel surfaces, for stucco and base core plasters used as a final wall finish, for repairing old plaster, or on smooth concrete, aerated concrete, and drywall. This plaster stands out for its perfectly smooth finish. It can be painted over with emulsion paints. Layer thickness: 1–5 mm (recommended: 3 mm).
WALL Adhesive for Stone/Marble Tiles
An epoxy-based adhesive specially formulated for applying stone carpet to vertical surfaces. The adhesive can be used with all types of marble and river pebbles up to a size of 4–6 mm. The package also includes a primer. Suitable for both exterior and interior applications.
WALL UV Adhesive for Stone/Marble Tiles
A polyaspartate-based binder specially formulated for applying stone carpet to vertical surfaces. This UV-resistant binder is designed specifically for exterior applications, ensuring color fastness of the aggregate and marble. The binder is characterized by high strength, chemical resistance, freeze resistance, and excellent UV resistance.
Pro zvolené filtry nejsou aktuálně k dispozici žádné aktivní produkty.