Sypké směsi

A highly flexible cement-based adhesive with reduced slippage and an extended setting time, suitable for more demanding conditions. Designed for bonding wall and floor tiles, bonding thermal insulation materials, and applying a skim coat over reinforcing fabric. Can be applied directly to existing floor tiles, electric heating mats, large-format elements subject to high mechanical loads, as well as plaster, concrete, aerated concrete, unplastered masonry, etc.

Flexible gel adhesive for wall and floor tiles. For bonding larger-format tiles and applications requiring greater flexibility.

For wall and floor tiles. Improved cement-based flexible adhesive (S1). Designed for bonding ceramic wall and floor tiles to interior or exterior substrates.

A thin-layer, cement-based adhesive mortar designed for bonding ceramic tiles and natural and artificial stone tiles to plaster, concrete, aerated concrete, and unplastered masonry, as well as for bonding tiles to liquid waterproofing coatings, such as “Tekutá lepenka” and other waterproofing compounds, etc. The adhesive is suitable for bonding polystyrene thermal insulation materials or mineral wool boards to facade masonry. For skimming facade mineral insulation boards and polystyrene using reinforcing mesh.

A thin-layer, cement-based adhesive mortar designed for bonding ceramic wall and floor tiles, natural and artificial stone, fine-grained stoneware slabs of varying thicknesses, and large-format slabs to plaster, concrete, aerated concrete, and unplastered masonry. It is also used for bonding floor tiles to heated floors, as well as to liquid waterproofing coatings (e.g., Tekutá lepenka) and other waterproofing materials. The adhesive is suitable for bonding polystyrene thermal insulation materials or mineral wool boards to facade masonry.

A thin-layer, cement-based adhesive mortar designed for bonding ceramic wall and floor tiles, natural and artificial stone, and slabs of varying thicknesses—such as Lotto tiles, fine-grained stoneware, and large-format slabs—to plaster, concrete, aerated concrete, and unplastered masonry. It is also used for bonding floor tiles to heated substrates, liquid waterproofing coatings (e.g., Tekutá lepenka), other waterproofing materials, and existing floor tiles, etc. It is ideal for bonding polystyrene thermal insulation materials or mineral wool boards to facade masonry.

This is a versatile, ready-to-use dry core plaster designed for panel surfaces and as a base coat, primarily used for wall finishing, repairing old plaster, or on surfaces such as brick, concrete, and aerated concrete. It meets all parameters specified in EN 998-1 in accordance with the requirements for Class GP plaster.

This is a dry cement-based adhesive and skim coat mixture designed for the complete process of facade insulation, i.e., bonding thermal insulation materials such as EPS (expanded) polystyrene for facades, XPS (extruded polystyrene), and mineral fiber insulation boards to masonry and facades. It is also used for the entire skimming process, i.e., applying reinforcing mesh to these thermal insulation materials, thereby creating an ideal substrate for the final finish before applying decorative plasters.It is also used in combination with reinforcing mesh for the renovation of old, cracked plaster. A system product for the certified thermal insulation system / ETICS Den Braven Therm STYRO and Den Braven Therm MINERAL.

This dry cement-based adhesive and skim coat mixture is designed for the complete process of facade insulation, i.e., bonding thermal insulation materials such as EPS (expanded) polystyrene and mineral fiber insulation boards to masonry and facades. It is also used for the entire skimming process—that is, applying reinforcing mesh to these thermal insulation materials—thereby creating an ideal substrate for the final finish before applying decorative plasters. It is also used in combination with reinforcing mesh for the renovation of old, cracked plaster.

This is a dry cement-based adhesive and skim coat mixture designed for the complete process of facade insulation, i.e., bonding thermal insulation materials such as EPS (expanded) polystyrene, XPS (extruded polystyrene), and mineral fiber insulation boards to masonry and facades. It is also used for the entire skimming process, i.e., applying reinforcing mesh to these thermal insulation materials, thereby creating an ideal substrate for the final finish before applying decorative plasters. It is also used in combination with reinforcing mesh for the renovation of old, cracked plaster. It is not suitable for metal or plastic substrates, nor for wood or wood-based substrates!

This is a final-coat reprofiling mortar based on cement, fine filler, and modifying additives, offering excellent adhesion to concrete substrates and long-term resistance to water, weathering, and frost. Ideal for thin-layer repairs of concrete and reinforced concrete structures, as well as localized damage to balconies, loggias, fences, precast elements, etc. Use as a final layer in combination with the Concrete Filling and Repair Trowel. Does not run; can also be used on vertical surfaces. Subsequently, waterproofing, water-repellent, impregnating, and other protective coatings for concrete structures and exposed concrete may be applied as needed.

This is a cement-based filling and reshaping mortar containing fine filler and modifying additives, with excellent adhesion to concrete substrates and reinforcement, and permanent resistance to water, weathering, and frost. It is used for repairs and reprofiling of concrete and reinforced concrete structures, as well as for localized damage to balconies, loggias, fences, precast elements, etc. It does not run, so it can also be used on vertical surfaces. Subsequently, apply FINAL Concrete Repair Compound, self-leveling floor compounds, Liquid Board, single-component waterproofing, or cement-based tile adhesives as needed.

This fast-setting tile adhesive is designed for bonding all types of wall and floor tiles (including large-format tiles), paving stones, and mosaics in both interior and exterior applications, on floors and walls made of traditional materials with cement plaster, cement screeds, anhydrite screeds, and drywall (after prior treatment with a primer). It is also suitable for interior painted walls, provided the paint is firmly bonded to the substrate, as well as for old marble or terrazzo floors and sufficiently cured concrete structures.

This is a fast-setting, cement-based repair mortar. Once cured, the mortar is resistant to water, weathering, and freezing. Application thickness in a single pass: 1 to 30 cm.

A self-leveling screed mix based on ALFA gypsum, fillers, and special performance-enhancing additives, which cures through water evaporation, creating a permanently strong surface comparable to concrete. Once fully cured, it does not require sanding. Its advantages include high flexural tensile strength. It is followed by the installation of, for example, floating floors, tile, parquet, carpet, linoleum, and vinyl. It complies with the EN 13813 standard.  The mixture can be applied both manually and mechanically.

A self-leveling screed mix based on ALFA gypsum, fillers, and special performance-enhancing additives, which cures through water evaporation and creates a permanently strong surface comparable to concrete. For thicknesses of 2–30 mm.

This is a self-leveling screed mix that creates a permanently strong surface comparable to concrete. This self-leveling mix features a revolutionary sand-free formula that can level out height differences ranging from 0 to 30 mm. It is not suitable as a final surface finish.

A professional cement-based leveling compound designed to perfectly level subfloors before installing tiles or other floor coverings. It creates a permanently solid and level surface for interior use.

For large-area leveling of significant unevenness, primarily on concrete floors, with a thickness of 2–30 mm, in a single application. The self-leveling compound has excellent flow properties and high strength. The final layers of floor coverings are then installed, such as floating floors, tile, hardwood, carpet, or linoleum. Complies with EN 13813. Safe for foot traffic after 8 hours.

For leveling out significant unevenness, particularly in concrete floors or sloped layers, as a substrate for Liquid Underlayment or cement-based tile adhesive. Levels height differences in a single layer of 2–30 mm; can be applied over the entire surface up to a total thickness of 30 mm in two layers. For leveling local unevenness up to a thickness of 30 mm in a single application. The final layers of floor coverings are then installed, e.g., floating floors, tiles, parquet, carpet, or linoleum. Complies with the EN 13813 standard.

A self-leveling screed compound based on cement, fillers, and special performance-enhancing additives. It is used to level concrete surfaces as a flexible leveling layer for heated floors in commercial and residential construction. Levels height differences across the entire surface to a layer thickness of 2–30 mm in a single application. The final layers of floor coverings are then installed, such as floating floors, tiles, parquet, carpet, or linoleum. Complies with EN 13813. Normal foot traffic permitted after 8 hours.

Post concrete is a dry concrete mix that can be applied without a mixer or mixing. It sets quickly, beginning to harden after just 5 minutes. It is used primarily for the rapid anchoring of posts, poles, traffic signs, lamps, gazebos, metal legs, clotheslines, and other garden features.

This is a ready-mixed stucco plaster used primarily for finishing walls, repairing old plaster, or applying to surfaces such as smooth concrete, aerated concrete, and drywall. When used in less demanding applications, its whiteness allows it to serve as a substitute for a primer. It is intended for the renovation of prefabricated apartments after wallpaper removal, for wall repairs, or for repairing old plaster before painting. It is suitable for use in finishing work after the base plaster has dried.

This is a versatile dry stucco plaster intended for direct application as a thin-layer plaster, on precast panel surfaces, for stucco and base core plasters used as a final wall finish, for repairing old plaster, or on smooth concrete, aerated concrete, and drywall. This plaster stands out for its perfectly smooth finish. It can be painted over with emulsion paints. Layer thickness: 1–5 mm (recommended: 3 mm).