FASTdry Quick-Drying Primer
FASTdry Quick-Drying Primer is a special, quick-drying, single-component coating ideal for both absorbent and low-absorbent substrates. It is recommended for use under Den Braven self-leveling compounds, where rapid drying of the primer is essential, as it serves as a bonding agent prior to the application of screeds and adhesives.
NANO System Deep primer
A high-quality, deep-penetrating system with nanoparticles designed to unify the absorbency of the substrate and reduce water absorption prior to installing wall and floor tiles, before leveling floors with self-leveling compounds, for spot repairs to concrete substrates, concrete floors, brick masonry, and plaster, or before painting masonry or facades. The nano-size of free particles in the primer dispersion was determined at the Institute for Nanomaterials, Advanced Technologies, and Innovation at the Technical University of Liberec.
S2802A Primer of Building Substrates
A single-component, low-viscosity liquid based on an aqueous dispersion of the styrene-acrylate copolymer SOKRAT, which forms a transparent, water-insoluble polymer film upon curing. It reduces and evens out the absorbency of the substrate and improves the adhesion of subsequent layers. It is used for primer coats under base and finish plasters, as well as for exterior and interior paints. It is also used to improve the adhesion of construction adhesives, self-leveling compounds, etc.
ALFA Primer
A single-component sealing primer that forms an elastic, transparent, durable, water-insoluble film. It creates an adhesive bond between subsequent layers. Particularly suitable for use under self-leveling compounds.
ConcreteContact
Solvent-free coating. Creates a bonding primer for subsequent layers. Intended for indoor and outdoor use to strengthen critical substrates; alkali-resistant, vapor-permeable, and weather-resistant. For preparing concrete surfaces prior to the application of gypsum-based materials, such as gypsum plaster, skim coats, and gypsum leveling compounds. The coating’s drying time is approximately 10 hours.
Adhesive Bridge Concentrate
The adhesive primer is a single-component, solvent-free coating that can be used both indoors and outdoors on cured plaster, non-structural and exposed concrete, glass wallpaper, wood, paper, and drywall surfaces, as well as chipboard, OSB panels, Formica, wall and floor tiles, etc.
2K Liquid Cardboard Waterproofing
Top-quality cement-based waterproofing for use under wall and floor tiles. The ideal waterproofing coating for balconies, terraces, loggias, and basements, as well as for bathrooms, shower stalls, and other areas.
Krystalizol Cement-Based Crystallizing Waterproofing
It is a waterproofing system that prevents water from penetrating concrete or other cement-based substrates exposed to constant water pressure. It provides dual protection. The capillary component penetrates deep into the capillary structure of the concrete, where it crystallizes and seals the concrete from the inside. The barrier action forms a solid, waterproof layer on the surface of the structure. It ensures increased impermeability of concrete and mortar against water, acids, and petroleum products, prevents concrete corrosion, and simultaneously forms a waterproof layer on the surface. Any type of paint or plaster can be applied to a surface treated with Krystalizol.
1K Cement-Based Waterproofing
In modern construction, virtually no building project can do without waterproofing. Whether you’re building or renovating a bathroom, terrace, or balcony, it’s always essential to have high-quality waterproofing that prevents water from penetrating into other structures. 1K Cement-Based Waterproofing provides all of this. It is a durable and highly flexible cement-based waterproofing compound with excellent adhesion to the substrate and resistance to water pressure.
Single-Component Waterproofing for the BATHROOM
A ready-to-use, single-component, semi-fluid compound based on a polymer dispersion. Once the compound dries, it forms a highly elastic, impermeable, water-resistant coating with good adhesion to the substrate. This waterproofing product is designed for applying waterproofing coatings under ceramic wall and floor tiles in interiors with high humidity: bathrooms, showers, restrooms, laundry rooms, basements, kitchens, dishwashing areas, vegetable sorting areas, in food service facilities, etc.
EXTERIÉR Single-Component Waterproofing
A ready-to-use, single-component, semi-fluid compound based on a polymer dispersion. Once the compound dries, it forms a highly elastic, tight, water-resistant coating with good adhesion to the substrate. This waterproofing product is designed for applying waterproofing coatings under ceramic wall and floor tiles in the interiors and exteriors of buildings: balconies, terraces, loggias, wet areas, bathrooms, showers, toilets, laundry rooms, basements, kitchens, washrooms, etc.
1K FINAL Polyurethane Waterproofing
1K FINAL Polyurethane Waterproofing is a modern, single-component polyurethane waterproofing system that is the ideal choice for roofs and terraces. It creates a durable, long-lasting protective layer. It features excellent water resistance and withstands mechanical stress as well as temperature extremes ranging from –40 °C to +80 °C. Thanks to its UV stability and freeze resistance, it provides lasting and reliable protection for many years.
STŘECHA S-T4 Flexible Waterproofing
A single-component waterproofing coating based on a copolymer dispersion and iron(II) oxide. Ideal for the renovation of asphalt-shingle roofs with a minimum roof slope of 3%. Protective coating for galvanized sheet metal and asbestos-cement roofing. Once cured, it forms a waterproof waterproofing membrane. Note: Surface irregularities must not exceed ±5 mm.
GUMOASFALT DN 350 (water-based)
GUMOASFALT DN 350 (water-based) is a new-generation waterproofing coating with an improved formula. Suitable for roof renovations and for protecting basements, garages, and concrete foundations. Adheres to sheet metal, concrete, and wood.
Pro zvolené filtry nejsou aktuálně k dispozici žádné aktivní produkty.
Spolehlivý základ pro každou stavbu
Každá vyrobená šarže našich směsí prochází přísnou kontrolou kvality a testováním. Výsledek? Materiály s maximální pevností, soudržností a konzistentním výkonem – od samonivelačních stěrek, přes lepidla a omítky až po fasádní směsi. Ověřená technologie, dlouhodobá stabilita a ohled na přírodu – to vše dává profesionálům jistotu, že jejich stavba obstojí i v náročných podmínkách. Pro řemeslníky, kteří odmítají kompromisy. Pro stavby, které opravdu vydrží.
6 Reasons
Why Work With Us
1
High Quality, Consistent Performance
Our products undergo thorough development, laboratory testing and real-world performance testing to ensure reliable, long-lasting results.
2
In-house Development and Testing
Thanks to our in-house R&D and testing centre, we can innovate quickly, tailor products to specific requirements and deliver proven performance in line with our customers’ needs.
3
Trusted Across Europe
Our products are used in construction projects across Europe, where customers rely on their quality and dependable performance to build with confidence.
4
Modern Manufacturing Facility
Automated processes ensure consistent quality, manufacturing flexibility and fast response to orders, helping keep your projects supplied with the materials they need.
5
Custom Private Label Solutions
You design it. We manufacture it – under your brand and tailored to your needs.
6
Sustainable Manufacturing
Environmental protection is a key priority for us. We manage our manufacturing responsibly and sustainably, with a strong focus on safety, quality, efficient use of resources and careful waste management.